Re: Unable to export rules, rule bindings & Key data domains
↧
↧
Re: Login Page displayed when Rest session used in OpenDocument Link
Unfortunately that didn't solve the issue. Do you have any other suggestion please?
↧
Re: pass parameter to crystal report
I changed to
objRpt.SetParameterValue("deliverynote",deliverynote)
I still doesn't work
↧
Re: Gross Profit Recalculation Wizard
I know!.. this is very strange and I don't understand it. Hope someone can give me any light. I'm thinking someone knows the cause of this. 
↧
Re: Maintenance Plan schedulling issue
Hi Maria,
In terms of strategy, it is no problem.
What it does in scheduling is the 2 separated order based on the 2 different units, Mon and Year.
Thank you so much,
Sally
↧
↧
Loading Product Responsibility and Organization Responsibility
I have to load a large amount of Product Responsibility and Organization Responsibility data for Purchase Groups in SRM. Is there a function module or load program to facilitate such a load?d
↧
Re: Tasks status not getting refreshed
Judith,
I followed the first option of removing from favorites and readding it. But no effect again.
The second option works if we complete the task from browser. But when externally completed this issue happens. Is there some way by which we can differentiate whether it is SAP issue or my enhancement issue?
-Trupti
↧
Confirm End of Processing in user Decision Task
Hello All,
I know there is no option of "Confirm End of processing" in User Decision but here's the requirement:
I need 2 options in my Workitem:
Button 1: Process XYZ (To call a Transaction)
Button 2: Send back to Prev Dept (Similar like Reject)
When user clicks button 1, he should be taken to a Transaction to do some processing. When he comes back it should ask if the processing was completed and he wants to complete the workitem, something like "Confirm End of Processing in Activity task". If user says, Confirm, the workitem should comlete, but if he says Cancel, it should take him back to User Decision, when he can select Option 2 to send it back to Prev department.
Here are the options I could think of: Create a user Decision Task inside a Loop with those 2 options. Under branch 1, I create an Activity step(Dialog) to call the transaction. And branch 2 will be like Reject to Exit out of Loop, to circle back to the outer Loop for sending back to prev department. When the activity task is executed and user comes back, a new User Decision is created to give user ability to select option 2. Now, between the activity task and new UD in the loop, I need something like "Confirm End of Processing" popup to say either Processing Completed or not. If "Completed", I exit out of the Loop, but if "Not Completed or Cancel", then the new UD is created. I can't enable "Confirm End of Processing" on the Activity Task, as that might keep the activity workitem open.
Please suggest if there's any way to achieve this or any other idea.
Another option I could think of is adding one more button in between to say "Processing Complete" so that when user comes back a new User Decision is created and he can then select "Processing Complete" to exit out of the loop. But I am not sure if this is a good option.
↧
E-mail at MD04
Hello!
How may I customize SAP to put one or more standard e-mail adress at MD04?
↧
↧
Re: 由EXCEL作为数据源的WEBI如何更改数据源
您好
您用的BI是什么版本的， BI 4.1SP05之前， 只有WebI rich client可以更改数据源， 4.1 SP05 之后， Java模式和Rich client 都可以的。 HTML（Web）模式始终是不可以的
2171411 - BI 4.x : Change source option is disabled in Web Intelligence when data source is Excel
↧
Re: Tasks status not getting refreshed
Basically I am completing my task externally using below code
data ls_action type dpr_ts_ui_do_action.
data lv_value type string.
data lr_det_data type ref to cl_dpr_ui_log_detail.
lr_det_data ?= cl_dpr_ui_log_task_detail=>get_instance( ).
lv_value = 'ACTIDX03'.
get reference of lv_value into ls_action-parameters.
ls_action-guid = lv_task_guid.
ls_action-action_key = cl_dpr_api_co=>sc_action_status_set.
call method lr_det_data->report_action
exporting
iv_guid = ls_action-guid
iv_obj_type = cl_dpr_co=>sc_ot_task
iv_action_name = ls_action-action_key
is_parameters = ls_action-parameters.
lr_chg_mgr = cl_dpr_ui_change_manager=>get_instance( ).
lr_api_chg_hndlr = cl_dpr_api_change_handler=>get_instance( ).
cl_dpr_ui_event_source=>start_report_change_events( ).
lr_chg_mgr->reset_schedule_flag( ).
Am i missing something here?
Also one more special behavior i am seeing is,
Suppose my task TTT is Completed externally and the above mentioned issue is happening for TTT, ( i.e the status of TTT as release in Favorites). Later if i create another task TTT1 in same project XXX and Complete it externally. I see that, now the Task TTT status get updated ritely in Favorites tab but the new task TTT1 status not displayed correctly.
i digged in to Standard Refersh code but didnt get any clue on why its happening. :-(
↧
Re: Requirements type VSEV does not exist
Hi Sakti,
Requirements type is used in the tcodes: OPPS (after is used in the OPPT)
Strategy group is used in the material master (view MRP3) or MRP Group (OPPR) view MRP1
Strategy group contains planning strategy that is used in MD61
You need to check the group of strategy / strategy of the materials of your material group
Regards
Dimas Faria
↧
Re: Transaction Notification Problem
Hi Vassilis,
Have you tried it ?
If the docentry is the same, the select statement will return you the error whenever there is an U_Status = 'Approved' regardless of whichever line it is.
So long as there is an 'Approved' status on any line.
or.. Am I missing what you need ?
Regards
Edy
↧
↧
Re: CFL not loading data
Hi Mayank,
Instead of setting the
Is_BML.Checked =True
Set the base datasource to 'Y'
ie if the Is_BML is bound to a DBDataSource,
form.DataSources.DBDataSources.Item("@DB").SetValue("Is_BML", 0,"Y")
Regards
Edy
↧
Re: Incapacidades
Hola Claudia
El problema es que tienes duplicado en configuración la forma de contar el ausentismo (Vista V_554S_Q + Vista Cluster VC_T556C) , con lo cual si detecta que son 8 dias pero te está mostrando 16.
Ahora bien, cuando esto impacte en calculos lo que deberas de revisar es como se esta llevando en la sección de Alicuotacion (Esquema MXAL o equivalente) o en tus reglas propias de cliente de configuración.
Saludos
Amilcar Caballero
↧
Retrieving DocumentLines in SAP B1WS ASP.Net
Hi Experts,
Currently developing web application using asp.net with SAP B1WS, I'm about to retrieve data from Purchase Order Document, no problem in Header Document but with comes to Document Line I'm having a trouble on how to do it. below is my sample code.
Thanks & Regards
Alvin
↧
Account Summary
We have a business case to be able to execute a summary roll-up of sales and activity transactions across all child accounts up to the parent account. Our business supports multi-national companies that operate in hundreds of locations around the world. Our key leaders would like a quick, at-a-glance summary of key information.
Is this possible? Several SAP folks have said yes, but I haven't found where we can enable that feature.
↧
↧
Re: No EH created after initial creation
Hi Dipak,
When I check your screenshot with OBJNR field, the field value may not be populated in VBAK-OBJNR though you have done SAP EM configuration correctly.
Follow the steps extra to check in detail:
1. Go to SE16N and check the Sales Order number in VBAK table.
2. Check the field VBAK-OBJNR for Sales Order number and check data populated e-g "VB0012345678000000" - <VB><SalesOrderNumber><000000> (To check VBAP, you need to check VBAP-OBJNR - <VB><SalesOrderNumber><000010>). If yes, then check the solutions which we have given in this discussion.
2. If there is no data in VBAK-OBJNR, then you need to check Sales Document type "XXXX" is assigned with Status profile.
3. To check and assign status profile IMG -> Sales and Distribution -> Sales -> Define And Assign Status Profile -> Assign order types / status profiles.
Regards
GGOPII
↧
Re: Webi 4.1 SP7 - see last instance issue - report automatically refresh
Hi Mr. Kashif,
This behavior is common only to 5 reports after all.
Something happened to the original report and all the reports created "by copy" share this issue.
Even try to remove all objects from report to query but without success...
Thanks for your help.
↧
Re: Product cost collecter - Period end closing
Hi..
SAP Help portal site is the best tool for you understanding SAP Standard process.
↧
