Hi,
I don't have this requirement but I am curious to know more about it,
Regards
Re: Create Macros in Excel using Abap
↧
↧
Re: Response Delayed
Hello PR,
In the ICO modify the logging/staging options to increase the performance.
↧
Re: Wagetype Transfer Issue on Payroll
I had not noticed that you had posted this pcr at lunch time when I first answered you, so I would suggest that you modify it as following:
NUM=1
MULTI ANR
ZERO= NA
ELIMI YZ
ADDWT 9231
↧
Re: Analyze KPI Details error
Hi Gunjan,
I also not sure about the real solution. I simply try remove all the Hana role, clear the UI cache and add back relevant hana role, the drill down navigation is missing.
Hope this may help.
Regards,
-Ben-
↧
Re: How to configure SAP ASE for SMP 3.0
Unfortunately there are sometimes areas which overlap. So even though the space titles may be a little ambiguous, there is still some difficulty in determining which is the right one for a Discussion. Some of this is historical in nature.
For example: Agentry products were part of Syclo which was acquired by SAP a few short years ago. Since it did not fit any other mobile related community, it was assigned to SAP for Mobile (which is normal for many mobile related products or topic areas). Since being acquired, it was later redesigned/redeployed on the SAP Mobile Platform (SMP). So many of the configuration/installation issues that come up are now related to SMP, there are quite a few Discussions which relate to Agentry that now show up in the SMP Developer Center. Which community is the right one? I and other Moderators have had this conversation before. The best we can do is based on a judgement call that Agentry questions unrelated to SMP can remain in SAP for Mobile. Those which are SMP related (particularly configuration, installation, or app deployment related) can go into the SMP Developer Center community. However, it is not a hard fixed rule, rather a guideline. If the Discussion is in one or the other and not really clearly specific to one or the other, then we tend to leave them alone.
Similarly for Fiori and SAPUI5, and Theme Designer (Fiori or UI Technology communities), etc.
MII uses SAPUI5 technology, each of which have their own community. Where should an MII SAPUI5 Discussion be assigned??? The Moderators (I am one in each community) need to make a judgement call. I usually assign depending on whether the question is something SAPUI5 experts could best respond to or whether MII knowledge is more applicable. Knowing both technologies, I can often make a good judgement call, but I may not be correct all the time. Then you put in a link to the other community so both sets of experts can view and respond.
Cheers, Mike (Moderator)
SAP Technology RIG
↧
↧
IDOC Segments Mapping issue in PO 7.4
Hi Guys,
I have a requirement where one of my IDOC segment will be mapped from source structure 5 times. The target structure should be dynamically filled.
Source Structure
<E1XXX14 SEGMENT="1">
</GTBDR>
</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
</GTBDR>
</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
</GTBDR>
</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
</GTBDR>
</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
</GTBDR>
</AFNTR>
</E1XXX14>
In the target I should get the below value into my IDoc structure
<E1XXX14 SEGMENT="1">
<GTBDR>011</GTBDR>
<AFNTR>ABC</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
<GTBDR>007</GTBDR>
<AFNTR>PQR</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
<GTBDR>080</GTBDR>
<AFNTR>XYZ</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
<GTBDR>900</GTBDR>
<AFNTR>RST</AFNTR>
</E1XXX14>
<E1XXX14 SEGMENT="1">
<GTBDR>319</GTBDR>
<AFNTR>WXY</AFNTR>
Thanks in Advance!
↧
Re: Lowercase Letter issue
Hi,
In addition to Sander's suggestion..Just use your infoobject directly in the PSA to get the infoobject's setting such as the LOWERCASE..
Regards,
Loed
↧
Re: GUID issue with ABC/XYZ Classification and Forecast Optimization
Hi Stephenie,
Just wanted add one more pointer -
Following five fields are the key fields(primary key) for Table name : /SAPAPO/DP_FCST2.
Client
Name of DP Planning Area
Selection ID
Key Figure (many time key figure field is a culprit for this behavior - its a good idea to leave this field as blank)
Name of Planning Version
By looking at the current design in your system if you ensure these above five fields has or gets the SAME value - either when running forecasting interactively or when running it through FC Optimization. If you able to achieve this, then you will end with only single entry in //DP_FCST2 table. Hence there will not be more than one forecast assignments for the single/same selection.
As mentioned above, Please watch out for value in Keyfigure field in this table - Forecast Profile assignment done by Interactive Planning leaves this field value as BLANK, please check what happens with entry created by Forecast Optimization.
Since I do not have ABC_XYZ configured in our system, I am not able to visualize further.
Hope this will help you get some clue.
Thank you
Satish Waghmare
↧
Re: IDOC Segments Mapping issue in PO 7.4
Hello Waseem,
Please elaborate more on the requirement.
Source and target uses same IDOC?
Populate values dynamically means which values the one coming from source or random?
↧
↧
Re: How to link a Contact to Interaction?
Hi Thierry, if you leave ID_ORIGIN or ID empty during CSV upload, the system will generate ID automatically. Hence, the match is happening only by email or phone no.
For example, if you upload following two interactions which doesn't have email address ( l left it blank deliberately), then this will create 2 interactions but 1 contact because it matches by ORIGIN_ID and ID.
SAP_CRM_BUPA;1001;WEB;WEBSITE_REGISTRATION;20150205124748;BIG_DATA;;;;5;;;;;;;;;;www.clickstreamer.com/websession-id=01234;;;bha Doe;bha;Doe;;+0123456789;+0123456789;X;;X;X;X;4;4;Sample text;Sample text;123456.12;Sample text;Sample text;Sample text SAP_CRM_BUPA;1001;WEB;WEBSITE_REGISTRATION;20150205124750;BIG_DATA;;;;5;;;;;;;;;;www.clickstreamer.com/websession-id=01234;;;bha Doe;bha;Doe;;+0123456789;+0123456789;X;;X;X;X;4;4;Sample text;Sample text;123456.12;Sample text;Sample text;Sample text
↧
Re: How to implement AMDP class using "alter".
Nope, above meant:
Using dynamic DDL *inside* of the stored procedure.
↧
Re: Dynamic URL and AS2 ID in SAP AS2 Adapter
Hi Ryan
Thanks for your response. May I know key names that can be used at runtime.
↧
SAPinst GUI Server could not be started on AIX
Hi Gurus, I am running SWPM on a QAS Server. I need to do a system copy, I download last version of SWPM. My operating system is AIX :
# oslevel -s
6100-04-03-1009
DB2 is my database.
I need run sapinst, but following error show:
# ./sapinst
[==============================] - extracting... done!
SAPinst build information:
--------------------------
Version: 2015.08.0
Build: 1602494
Compile time: Sep 18 2015 - 16:03:56
Make type: optu
Codeline: 720-2_REL
Platform: rs6000_64
Kernel build: 721, patch 419, changelist 1564913
SAP JRE build: 61.80.80
SAP JCo build: 3.0.13
Exe directory: /tmp/sapinst_exe.397446.1443826546
guiengine: 2015-10-02 18:29:00 Waiting for client connection (1)
The GUI could not be started because the environment variable DISPLAY is not set . Please make sure that this variable is defined correctly or start the GUI on another host (for details please consult the installation guide)
Starting GUIServer using:
SAPinst port : pipe:5:8
GUIServer port : 21212
GUI autostart : on
GUI mode : normal
command : /usr/java14_64/jre/bin/java -Xmx512M -Dsap.env.var.javahome=SA PINST_JRE_HOME -cp /tmp/sapinst_exe.397446.1443826546/JAR/instgui.jar SDTServer rootdir=//.sdtgui config=jar:sdtserver.xml guiport=21212 -nolock -srvarg=/SAPins tService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8 guistart=off
The SAPinst GUI Server could not be started.
Java has been started with the following command line:
-Xmx512M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.397446.144 3826546/JAR/instgui.jar SDTServer rootdir=//.sdtgui config=jar:sdtserver.xml gui port=21212 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstServic e/port=pipe:5:8 guistart=off
Because “SAPinst GUI Server could not be started” I can not continue.
I have JRE installed and path environment.
JRE:
# java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build ca ix64142-20090307 (SR13) (JIT enabled: jitc))
Export command in AIX:
# export
AUTHSTATE=compat
HOME=/
LANG=en_US
LC__FASTMSG=true
LIBPATH=/usr/sap/BEQ/SYS/exe/run
LOCPATH=/usr/lib/nls/loc
LOGIN=root
LOGNAME=root
MAIL=/usr/spool/mail/root
MAILMSG='[YOU HAVE NEW MAIL]'
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
ODMDIR=/etc/objrepos
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java5/bin
PWD=/tmp/SWPMAix2
SAPINST_JRE_HOME=/usr/java14_64/jre
SHELL=/usr/bin/ksh
SSH_CLIENT='10.2.1.19 53235 22'
SSH_CONNECTION='10.2.1.19 53235 192.168.1.48 22'
SSH_TTY=/dev/pts/0
TERM=xterm
TMPDIR=/tmp
TZ=America/Caracas
USER=root
I check: permissions of SWPM (all in 777), I check space (I have free space), I ran this media on another AIX Server and it is ok, fine, then I know my software (SWPM) is OK. I search /tmp/sapinst_exe.663714.1443818609 and try to locate any log, but nothing there is.
Any other suggestion?.
Regards,
Jose
↧
↧
Re: How to display field technical name in RSA3 output?
Hi,
otherthan go to RSA2 and check the technical name if the fields.
give the data source in RSA2 transaciton -> go to extract structure - find the technical name of the fields.
some times it is not possible seeing the technical name, cross check the extract structre technical names
Thanks,
Phani
↧
Re: Re transferring the customer data or material data from GTS to R3
Hi GTS Experts
any one update please ?
↧
Re: Is there a max size for a blob?
That would be true for VS applications. However, for PB applications - I use the "/3GB" switch.
↧
Re: Error with RSA3
HI,
can you check any mandatory fields is there for RSA3 exteaction while executing the data source.
if it FM it will work then data soruce will work.
can you send to us error screen shot.
Thanks,
Phani.
↧
↧
Re: Custom logic for Replenishment
Experts,
This is order related replenishment scenario.
My storage type seq is as below,
Seq no 1 PICK (Fixed bin)
Seq no 2 OFLO (Overflow)
I would like to fill multiple bins in overflow storage type in case there are no fixed bins left for filling replen qty & in case overflow bins are getting filled and still replen qty (HUs) are left.
Let me give similar example again,
Replen qty for storage type PICK is 2HUs. As per storage type seq. BADI gets called for storage type PICK first. There are no fixed bins which can accept 2 HUs. Standard code fetches the next storage type which is OFLO(Overflow). I have 2 overflow bins out of which 1 has the product filled already & has space for 1 more HU. Another bin is empty. I have to propose the bin with product filled first before empty bin. I do it & warehouse task gets created to fill 1 HU for this OFLO bin1. But since BADI is called only at storage type level, its not called again.. So i am not able to replenish the 2nd HU to overflow bin2.
Please let me know if my thread is not clear.
BR,
Aspire
Message was edited by: Aspire WF
↧
Re: Posting Document Number and Date against pay result of an employee
Hi,
Normally document number we will get in transaction FB03 and for better understanding check with your FI guy he can give you clear picture on this as this is FI side activity.
Regards,
Venkat Polisetty
↧
Assigning Vendors in ME51N - Personas 2.0 SP3
All,
When I try to assign a Vendor to an item in ME51N in Personas, the Vendor is not carried over.
I try to assign a vendor 10000223:
However it sticks to the previously assigned Vendor 10000216:
Is this a known issue?
Thanks,
Simmy
↧
More Pages to Explore .....
