_SYS_REOP user is a system user, and is always active at system level, so we don't need to re-activate it.
For more details please refer:
http://help.sap.com/hana/SAP_HANA_Administration_Guide_en.pdf >> section 7.1
Regards
Kumar 
Re: how to reactivate SYS_REPO user
↧
↧
Re: Hierarchical Grouping in webi like Crystal
Hi Nikil/Sahil
I am not asking about the Hierarchies in universe My requirement is I have to show the report like below
--In DB I have Mapping like this .,.Employee id , Employee name, Mangerid
The hierarchy is like this
Reps --> Manager--> Area Manager-->Director for 1 channel
For Other Channels Reps-->Directors
So Here it is Ragged Dimentions and levels are also not Fixed . The manager I can find using Managerid
Report Should be shown as below
Level1 Name --> Directior
Level2 Name -->Area Manager
Level2 Name --> Manager
Level3 Name --> Reps
Block with Rep Details .
So Basically I need to group the Records Based on Mangerid/ Name (It should be dynamic )
In CR I know we can do this based on the Hierachical Grouping
In DB We can achieve this using Connect by SQL . I want to know any way to do this in Webi Report Level
Regards
Yogi
↧
Where to get Demo Content for SAP HANA SPS7?
So, I finally ended up opening an 'Amazon Web Services'-account, since the new SPS7 is not (yet) available on Cloudshare. After having configured everything properly, including installing the update for SPS7, I am finding that there is no usable demo content on the system, or I just do not know how to identify it. The SYS_EPM-Schema is empty, therefor I tried importing something using the File-Import-Menu from my HANA-Studio for that instance. Does anybody know, whether one of the .tgz-files is a demo model for ODBO and ODBC?
I read, meaning browsed over, the document 'SAP HANA Interactive Education (SHINE)SPS 07'
' but cannot locate the SHINE demo unit in the SAP Marketplace. Maybe because we have not been granted access to that part, since we are in the trial and development phase with SAP HANA.
If anybody could share some light on how to best get some content for a SPS7 SAP HANA instance on AWS, I would highly appreciate it. Thanks in advance.
↧
Re: Minimum Hardware requirment for PI
I can't speak to PI being 64 bit only, but as for the other factors you need the following:
1. 64 bit CPU, single/dual/quad cores doesn't matter as long as it understands 64 bit instruction sets.
2. OS must also be 64 bit supported, and typically can only be installed if the CPU is 64 bit comp.
If you have a 64 bit CPU and running an OS as 32 bit; then you are more than likely not going to be able to install a 64 bit piece of software successfully/easily.
I'm pretty sure 7.11 PI is 32 bit; not sure about 7.3/7.31/7.4 PO though.
↧
Re: Need Guidance: SAP MM career
Hi,
If you don't have end user experience then go for MM or SD module as they are Associate Level modules and SRM and CRM modules requires basic knowledge of MM and SD.
The difference betn Engineer's and MBA's role in functional module depends upon experience in jobs.
I think you should think about ABAP because you have pre MBA experience in IT,
Currently I am searching job so I don't know how my advice will help you.
Visit Atos India Ltd in vikharoli for career guidance.
<<Moderator Message: Personal Information removed>>
Message was edited by: kishan P
↧
↧
Re: How to call NWDS from PI.
Hi Raghu - Did you check the document which i shared? It has an end- end scenario.
↧
Re: Travel History Data
Hi Mandar
Did you check the AEND in tcode PRTE, this contains the closest to a change history, in anycase, I'll move it to the Travel Management forum!
thanks
Sally
↧
Re: Select multiple lines in a sorted subsumarized ALV
Hi, you can not select total and subtotal lines.
But po numbers are filling also in the items lines. You can mass select items lines and get unique po numbers and do something what you want with this numbers.
Another way - create ALV output table only with headers of PO.
↧
Re: iView Template used when uploading role from R/3 to Portal
Hi Malyadri,
I guess I'm not sure what you are trying to say, but what I'm saying is when you create a role in the R/3 system and add a Web Dynpro ABAP application to the Menu of the role and upload the role from R/3 to the portal, it's creates a role in the portal and attaches iViews to the role within folders. I want to know what template within the portal is being used to create the Web Dynpro ABAP iView within the role.
This is a custom role.
Is that clearer?
Kevin
↧
↧
Re: Error while appending structure into BSEG Table
Hi Ramesh,
Can you please check where use list for your z structure and check where it is getting used..And then try to delete the same.
BR
Sumeet
↧
RFx Response - How to get answers from questions
Hey,
I would like to know how to get the answers from questions ( by IAPI or table where they are stored ) and if i can manipulate them.
Thanks!
↧
Re: ScoreCard Display setting
Ok.strange.
As i checked on my version its working as I mentioned .
Regards,
Javed
↧
Re: Issue with user WF-BATCH
Hi,
Are you able to debug the logic (following the BAPI_ISUPARTNER_CREATEFROMDATA call) on ECC side? If not, and if the AND WAIT does not solve the issue (or does not always solve it), could it be that there is some loose coupled logic handler activated for BUS1006.CREATED Event (or some custom Event handler triggered upon creating Business Partner), that needs to lock the Business Partner itself or performs something that in turn locks it..?
You can check the Event type Linkages for BOR Objects in Transaction SWETYPV:
Or switch on Event Trace in SWELS (for the user that perfoms BAPI), and display the trace in SWEL. If that doesen't bring an idea what's going on, I'd go for tracing WF-BATCH in ST12...
cheers,
Janis
↧
↧
Re: Concatenate negative sign in CR
While in the Customize window, also make sure to change the 'Negatives' from '(123)' to '-123'.
-Abhilash
↧
Re: Error Copying Environment on BPC 10.0 NW - ITAB_DUPLICATE_KEY
It's not possible to answer without details...
Vadim
↧
Re: SAP GUI Appearance Changes After VBScript Manipulation
Hello. Then you have no authorization for self maintain. Seems like you Need to raise an ticket to your Support Team for adding this Parameter.
↧
32 versus 64 Bit DB Files
On a Windows Server, is there any difference in the DB file created with the 64 bit toolset versus the 32 bit toolset? The same question for the data. Is the size of a Long xxxx in the 32 bit DB the same as the 64Bit?
Randy
↧
↧
Re: Multiple Inputs to one RFC
I'm on the same version as you. Just tried again and it worked... go figure. I think I have a caching issue? Maybe I didn't hit deploy who knows but your solution works!
↧
Re: Error while trying to visualize the results from algorithms (connect with Rserver)
Hi Bimal, so sorry, but I don't know where I can find that number. can you PLEASE check if I went to the right place?
I clicked with the right button at HDB(System), than properties, and then opened this screen:
is that the number I must put over cer_rserve_addresses?
Regards and sorry my ignorance.
↧
How can we show Total Quantity by characteristic in BEX ?
Hello,
We're working SAP BEX Designer. We need to show the Total Quantity (column number 5) by material.
Example:
The information in the infoCube is:
| Invoice | Position | Material | Quantity | Total quantity |
| 1 | 50 | |||
| 1 | 1 | 930100 | 20 | |
| 1 | 2 | 930200 | 30 | |
| 2 | 70 | |||
| 2 | 1 | 930200 | 70 | |
| 3 | 60 | |||
| 3 | 1 | 930200 | 25 | |
| 3 | 2 | 930100 | 35 |
The report should be as follows:
We must display the information by invoice and position.
Material 930100, invoices 1, 2 and 3, quantities: 20+35 = 55
Material 930200, invoices 1,2 and 3, quantities: 20+70+25=125
| Invoice | Position | Material | Quantity | Total quantity |
| 1 | 50 | |||
| 1 | 1 | 930100 | 20 | 55 |
| 1 | 2 | 930200 | 30 | 125 |
| 2 | 70 | |||
| 2 | 1 | 930200 | 70 | 125 |
| 3 | 60 | |||
| 3 | 1 | 930200 | 25 | 125 |
| 3 | 2 | 930100 | 35 | 55 |
We have already tried using Restricted Ratios, Cells and variables, but we didn't achieve to make it work.
Any idsas on how to achieve this?
Thanks!
Florencia
↧
More Pages to Explore .....
