Hi Hemanth,
It's good to see you.
ST07 only will give us USER load distribution over various modules. But when i checked ST07, it shows that user :79.
But in our system contains only 63 users.....Then how it is showing as 79 users?
Regards
Praveen
Re: From where "USERS" value in ST07 is taking
↧
↧
Re: Control key in Maintenance order.
HI Renjith,
Normally system takes the default control key from Work Centre and it will be applied in Operation Tab.
Any change you did in the Header Operation of the work order ?
Regards
Terence
↧
Re: vizframe localization
I have found a solution on SAPUI5 Explored
↧
Re: L-code for averge
Can you provide your example a bit more detailed, please?
On which level e.g. MONTHPRODLOCCUST is the KF1 you want to average?
On which level do you want to maintain your KF2 in which you maintain the vaue "x"? Is thhat the same level? Or would you need that on e.g. MONTHLOC or...
Do you plan to change the value for "X" constantly or is that more or less fixed once it's set?
And how do you intend to display it in Excel?
I will not provide you with help for LCode as that is not supposed to be used.
But depending on your requirement you may be able to solve it differently
For example, there was already a post on how to make a quarterly average, for which alone there where minimum two possibilities posted at the time
Plus, if you just want flexible to see an average but dont need that in the grid , you can just mark those cells in excel and see the average on the bottom right corner anyhow
Or you build an EPM key figure if you just want to see one value and not a rolling value by adding a column in which you make the average depending on any other cell you provide somewere above your planning grid...
You see there may be more solutions to your problem than just LCode. WOuld be good if you provide a mockup-excel how it should look like
Yours
Irmi
↧
Input Variable for Keyfigures.
Dear Experts,
I have a report requirement where user will input the value based on key figures. For ex: i want to find out how many days the order was delayed. for this i have key figure "No of days" in my column which has values like 1, 2, 3..etc.
now the reqquirement is if the user wants to see the orders which are all delayed by 3 days.. how to set a input parameter for this. kindly share ur inputs,
Thanks
Vijay
↧
↧
to get system proposed messages while exception raised
hi gurus,
in my code in try block an exception got raised ,
like this 
so i want to know system proposing message .
can any body help me how to display the system proposed message while exception raised.
↧
Re: Understanding Capacity Consumption key figure
Thanks Ada. Understand. 
↧
Re: SAP FIORI Service SRA016_PRICE_AVAL_SRV failed
Hi Edward,
Were you not able to see SRA016_PRICE_AVAL_SRV service in /n/iwfnd/maint_Service transaction.
Click on Add Service and give local system alias and hit on Get Services, once the services are fetched, you need to make it active by adding its respective system alias.
Hope this helps.
Thanks,
JC
↧
Material Ledger Subcon issue
Hi Experts,
Could you please suggest for us .Where the additional cost picked for us in ML for subcontracting.We have maintain the sub con price as info record 0.86 for EA. in STD csot estimation the value are came correctly# 860000.BUt in CKM3 we are doing the COst set run.but this is pushing it up to Rs5.95 for Actual where this price is came in the report.resulting the 734000 of variance is update in the system.
↧
↧
Re: HTML mashup in the workcenter floorplan
Hi Sandeep,
If your requirement is to display the mashup in a separate work center, you have to assign the work center to your user. Once that is done you can open your EC as separate work center instead of opening in the account tab.
Regards,
Srinivasan
↧
Re: Understanding Capacity Consumption key figure
Thank you Alok.
↧
Re: SAP Business One 9.2 web access external URL
I Bryan,
I think that the correct way to use B1 Web Access from private and public network is to set SLD service with a DNS name, not with a IP address.
On private network the DNS name will be translate with the private IP and on public network will be translate with public IP.
↧
Re: Hoiw to Display Extra Fields in Administrative section of Appraisal Template
Hi Tania,
Thanks for reply.
We have created implementation for that BADI. But data is displaying only when user clicks on INFO link. But we want to display fields in Administrative section in Header itself.
Thanks,
Ravi.
↧
↧
Re: PS BOM issue with finished material with negative qty
Hi Pradeep,
Yes, we have to change in OP00 as we don't have option in PS customizing path. It works for PS also, as it is only configuration changes we are doing for PS control key.
kishore
↧
Re: Payment Add-On B1 9.1 PL08
That's not necessary.
EFM is needed only if you have to change or update the bank files.
I never activate it if it is not necessary.
Regards
Diego
↧
No selection, labels or tooltip with Pie Chart in Google Chrome
I've developed an Application which contains a pie chart an multliple other charts.
Unfortunately it is not possible to select a value from that pie chart and the labels are not being displayed.
There is also no tooltip on hover.
It just a pie chart with no additional information except legend:
There is no problem with the other components.
While testing the same Application with IE and Firefox the pie chart was working like it should.
I'm using Chrome in Version 48.0.2564.109 m
Design Studio is Version 1.6
Has anyone encountered similiar behaviour or even knows a workaround except switching Browser.
Thanks for any answer.
↧
Re: Looking for entry level job
Hi,
Companies who have already implemented SAP and have their own sap team
↧
↧
Re: FM to get binary data of archived image from Archive server
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET' EXPORTING region = 'B' IMPORTING folder_id = fl_folder EXCEPTIONS communication_failure = 1 owner_not_exist = 2 system_failure = 3 x_error = 4 OTHERS = 5. check sy-subrc = 0. FOL_ID-FOLTP = fl_folder-objtp. FOL_ID-FOLYR = fl_folder-objyr. FOL_ID-FOLNO = fl_folder-objno. OBJ_ID-OBJTP = OBJTP. OBJ_ID-OBJYR = OBJYR. OBJ_ID-OBJNO = OBJNO. CALL FUNCTION 'SO_OBJECT_READ' EXPORTING FOLDER_ID = FOL_ID "FORWARDER = FOLDER_CONT-FORNAM OBJECT_ID = OBJ_ID "OWNER = OWNER IMPORTING OBJECT_FL_DISPLAY = OBJECT_FL_DISPLAY OBJECT_HD_DISPLAY = OBJECT_HD_DISPLAY TABLES OBJCONT = OBJCONT OBJHEAD = OBJHEAD OBJPARA = OBJPARA OBJPARB = OBJPARB EXCEPTIONS ACTIVE_USER_NOT_EXIST = 35 COMMUNICATION_FAILURE = 71 COMPONENT_NOT_AVAILABLE = 1 FOLDER_NO_AUTHORIZATION = 5 FOLDER_NOT_EXIST = 6 OBJECT_NO_AUTHORIZATION = 13 OBJECT_NOT_EXIST = 14 OPERATION_NO_AUTHORIZATION = 21 OWNER_NOT_EXIST = 22 PARAMETER_ERROR = 23 SUBSTITUTE_NOT_ACTIVE = 31 SUBSTITUTE_NOT_DEFINED = 32 SYSTEM_FAILURE = 72.
↧
Re: Business One Database Maintainance .
Hi Raj,
Rebuilding indexes will speed up your system. However, if you want to include this step in your maintenance plan, you must make sure to set the steps up in the order I suggested.
Point is:
- Shrink database fragments indexes
- reorganize indexes defragments indexes, which messes up statistics
- so finally you update statistics
The need to rebuild indexes also depends on your MS SQL Servers version. If I am not mistaken, 2012 and newer work more efficiently.
Also the indexes will fragment quite quickly, so reorganizing them is not effective for very long. As B1 is meant mainly for small companies with relatively few transactions, reorganizing indexes is not considered effective enough by most database administrators and SAP.
I put it in our maintenance job because we have a 100 GB database, and create several hundreds of transactions every day.
If your database is 1 - 10 GB and your create 10 - 50 transactions on an average day, you may want to leave the reorganize indexes step out of the maintenance plan.
Regards,
Johan
↧
Re: Transportation of enhanced layout of bex query in production
Hi ,
oh, you are referring to bex description in info-object general setting (rsd1) ? if yes, then you need to transport info-object alone (also, check info-object data flow before and after to make sure nothing got deactivated).
you only need to transport only those objects which you made changes, if you are trying to enable long description in in-object and then change the same in query designer , then transport query too.
↧
More Pages to Explore .....
