Sapui5 with service web sap
Re: Adding custom field in Change Request General Data for SAP MDG
Please open a new thread with your question. This document (Enhancement of the User Interface Building Bloc... | SCN) that was highlighted above is the one you want to follow step-by-step.
Loading from BODSto SAP takes more time
Hi everyone,
BODS Job takes more time and consumes more memory for loading into SAP.
Data is loaded to SAP tables but the BODS Job is still running and it is never ending.
What could be the potential issue causing this ? Any idea?
Thanks,
SVB
Field value blank in Delta
Hi All,
I have a custom data source based out of a Ztable. The delta is enabled based on a time.The table has all the fields populated. When i run a delta, the records are retrieved, but the indicator field is blank. When i run a full load for same, the values are populating. Please advise.
Thanks,
Magesh Anandan.
OII timeout issue
Hi experts,
I need your help to identify the root cause for this sporadic failure in our BCM 6.0.11 / CRM 7 Ehp2 enviroment.
We´re using phone integration only.
Operator direct calls are handled via BCM CDT / Queue calls via CRM UI phone bar.
OII.Afterwork is set to 1
Normal procedure:
In CRM the agent clicks "Hang Up" to end a call and "End" to end the afterwork.
The status switches to "Ready" again.
Procedure in case of failure:
In CRM the agent clicks "Hang Up" but the UI keeps showing the connected call and keeps counting the time.
Clicking "End" has no effect.
The status is CDT works fine in both cases - the call ends and the status changes to "Afterwork".
The CRM webpage has to be refreshed to get it working again.
See both UIs with hanging CRM session in attached screenshot.
When the error occurs the OII log shows timeouts like this (all over 100000 ms):
09:24:35.620 EXC> phoneCallChanged failed in 100031 ms: appUrl=http://1.1.3.3:8025/sap(...)/bc/soap/ici?sap-session_access_token=...=appIds=[...]
callHandle: ...
lineNumber: +3xxxxx
processingStatus: 2/Active
callStatus: 101/Connected
capabilityList (13): 3 4 6 7 8 102 103 104 107 109 110 105 113
attachedData:
remoteNumbers (1): +3xxxxx
dialedNumber: +3xxxxx
inbound: False
internal: False
trunkId:
Timeout
System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext&context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(StringmethodName, Object[] parameters)
at ICIEventClient.IciEventClient.phoneCallChanged(String[] appIds,iciPhoneCall phoneCall) in c:\bcm_sp11_source\bcm_6\source\source\ExtAppIntegration\WebServices\ChatLib\ICIEventClient.cs:line 140
at ChatLib.SubChanged.Notify(AsyncState state) in c:\bcm_sp11_source\bcm_6\source\source\ExtAppIntegration\WebServices\ChatLib\SubChanged
SAP already checked OII logs / ICI traces and suggested to check the network between both systems, but the network connection is fine.
On CRM side the collegues haven´t found any errors at all.
This is a normal OII status line:
11:14:15.305 TRC> (Status) State=Connected Chat=Disconnected Clients=235 Users=257 Items=33 Subs=296 [SOAP:0/5/5/25 q=0/1 ms=0/46/1375 #=7325] [Chat:0/0/0/25 q=0/0 ms=0/0/0]
This is a OII status after the error appeared (I´ve seen SOAP ms max. values above 200000ms):
16:24:13.289 TRC> (Status) State=Connected Chat=Disconnected Clients=181 Users=302 Items=38 Subs=256 [SOAP:0/5/6/25 q=0/1 ms=0/50/100140 #=32562] [Chat:0/0/0/25 q=0/0 ms=0/0/0]
Thanks in advance for your help.
Re: User prompt to act as filters and a calculated filter
Hi Amit,
Thanks for your response.
How do I add user enter date so that data doesn't get filtered by that date only.
Right now I have added date field as a query filter user prompt, so the data is getting filtered only for that date.
Re: High Memory utilization in portal system.
Using OData custom query options (URL parameters) in Gateway
Hi,
I created a CDS view with explicitly defined parameters and generated a Gateway OData service on top using SADL. Now I want to use OData custom query options to map them to the CDS parameters. I'm quite sure that this will not work automatically.
I'm already able to set the CDS parameters in the OData service DPC_EXT class manually, using the method if_sadl_gw_query_control~set_query_options.
METHOD if_sadl_gw_query_control~set_query_options.
IF ( iv_entity_set = 'POIPARAMSet' ).
IF sy-subrc = 0.
io_query_options->set_entity_parameters(
it_parameters = VALUE #( (
entity_alias = 'POIPARAMSet' parameters = VALUE #( (
name = 'P_PurchaseOrderNetAmount' value = '10'
) )
) )
)
ENDIF.
ENDIF.
ENDMETHOD.
However, I want to use custom query options (URL parameters) and want to map them to CDS parameters within the DPC_EXT class.
The URL looks like:
...ZBF_POIPARAM02MAN_SRV/POIPARAMSet?P_Material='STANDARD'
Unfortunately, these custom query options are obviously not parsed by Gateway. I can't find them anywhere in the data structures of MR_REQUEST_DETAILS or MO_CONTEXT. Fields like PARAMETERS, MT_PARAMETERS or URI_PARAMETERS are empty or containing other stuff. The custom query options only appear in the ~request_uri header parameter in a non-parsed way like
....?param1=1¶m2=2¶m3=3.... [figure01]
Of course I can parse the query string myself but I believe there must be an other way to access them. However, I also read in a SCN post from 2012, that SAP doesn't support this aspect of the OData standard. Is this still true?
>> Query parameters in CRUD operations
Kind regards, Tobias
Re: In Payroll Canada, WT XXXX is not appearing on T4 in Box 40
Hi Remi,
Thanks for your reply. The entries in table are as detailed below:
V_596I_A
F40 Other Taxable All 1347 Vehicle All 01/01/2014 12/31/9999 + AMT
V_T5K6I
F40 Other Taxable All 1347 Vehicle All 01/01/2014 12/31/9999
Thanks and regards,
Victor
Re: XML View SplitApp Development
I used the same example from DJ Adams to do a SplitApp,
He used Component.js and seeing your view as view.Main I assume you don't.
Look if your view are all being called correctly or try to implement a root view called by a component.
Theo Medeiros
Re: credit does not show in budget
How about opening an hierarchy for the project to see line items for the WBS? Sorry, I just expect a minimum understanding from your side about the screens you are sending...
Which type of job is benificial - SAP Abap ?
Hello, I've recently completed my SAP E Academy, SAP ABAP, and I am going to appear in abap associate certification exams, before that I am trying to get some experience in field.
I would like to know which type of firm should I look for
1- That has SAP already implemented.
------- OR -----------
2- That is going to implement SAP.
My aim is to learn and progress. Which choice would be better?
Re: In Payroll Canada, WT XXXX is not appearing on T4 in Box 40
Did you try modifying the start date (to 01.01.2015) of your entries for sub-application T415 ?
Re: Extended Notifications sending task, that belongs to other agent
Hello,
No, that's not how Extended Notifications works. It sees who has the task in their inbox and sends them the mail. Very simple.
regards
Rick
PO workflow issue
Hello,
Our PO release strategy is based on cost center validation. The relationship between the cost centers and the approvers is defined in a specific table.
I have an issue with a PO validation. In the transaction ME29N, I can see a warning messagein the "Release strategy" tab showing "Release possible".
According to the user, the PO validation wasn't able to find the approver email.
How can I have more information on the issue ? I have found the SWIA transaction where I have checked the worfklow logs for the 4 worfklow ids related to the PO. In the third workflow log, I have found the following error message : "PO Rejected XXXXXXXX Release Code XX".
Where XXXXXX is my PO number and XX the release code of the approver.
The release code is the same as the approver release code where the PO is blocked. (I have found the approver release code through the following SPRO path : Materials Management > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders).
Where can I find further information about this error message ? Is there any other screen or transaction where I can see the rootcause ?
Thank you in advance.
Best regards,
Tom.
Re: RFC_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId error connection to partner
Hi Virgilio,
Have you got this problem fixed?
I have the same issue.
Please help.
Thanks,
Yang
Re: Want I want PowerBuilder to be
Re: message map help
Hi Keith,
You could try this out - I tested out your sample and it seemed to work ok but I couldn't promise it covers all the possibilities. The one key thing to mention is there is one context adjustment for EXIDV on the exists function to set it to the next highest level of E1EDT37. See below for the screenshot:
Regards,
Ryan Crosby
How do I get data from an htmlb table clicked row using javascript?
I am using a htmlb tableview and trying to get each columns information from the selected row in the table. I know how to do this in java through the selected row and the model but I am trying to avoid the round trip to the server and would like to get it using javascript. I have been able to get the selected key by using: getClickedRowKey() but I need to get data from 4 other fields. Is there any way to get the model so I can retrieve the information or is there another way? Any help would be greatly appreciated.
The best solution I have at the moment is to overload the key with extra information and parse it out in the javascript. Seems like there should be a better method of extracting an htmlb's table information.
Please let me know if you need any additional information.
Thanks,
Paul
Hide Left Side Panel using Open Document
Hello,
We have requirement to hide left Panel on Crystal Reports Viewer when called using Open Document.
Can I know the command to use on open doc url to hide this whole left pane?
Thanks,
Madhu