Hi Sachin
I would say, check Change Validation out for this purpose:
Best regards
Tom
Hi Sachin
I would say, check Change Validation out for this purpose:
Best regards
Tom
Hi,
How to define/create SOP-Standard operating procedure, SMP-Standard maintenance procedure in SAP PM and how to add it to my operations of task list?
Hi,
No, the custom login page not appears, if access the portal's HTTPS port directly using https://<private IP>:50101/irj/portal/
Regards,
Shreekant
Hi Anjket,
Which app was working with SAP_UI SP09?
You can follow the troubleshooting steps.
SAP Fiori - SAP Fiori launchpad troubleshooting
Regards,
Masa / SAP Technology RIG
Hi Kaushik,
1. Is it useful and beneficial for a FI Consultant to do BPC ?
Yes it is very useful for a FI Consultant to do SAP BPC because it is the latest version of Planning and Consolidation from SAP .
2. Should i have complete knowledge of SAP BI/BO before leaning BPC ?
No need of Complete knowledge of SAP BI/BO ; basic knowledge is sufficient to learn SAP BPC.
3. As a functional consultant which version of BPC i should learn ?
BPC has versions from 5.x,7.x,10.x. Now in market SAP BPC 10.0 is using you learn that one.it will be helpful to you.
Thanks and Regards,
Venkata Vinodh Kotha
Hi Ajay,
I tried exit COPA0005 (EXIT_SAPLKEII_001) with breakpoint. While running VF01 it is not stopping any ware. ABAPr conforming this is not useful.
Thanks
Once check it data target requst howmany records are transfers and added
Hi Iñaki Vila,
thanks for your response.
This is asyn soap to Proxy using ICO.
Are you sure all the messages are the same?. yes
May be you have any difference with the erroneous - no ( We have received all messages and posted successfully but sender didn't get ack hence gettting timedout )
Are you sure the response message comes to PI?. Could you share the log?,
Success - You can see the log "SOAP response leaving the adapter"
failed case ( ie. sender didn't get ack but message sucessfully received in PI )
NO log "SOAP response leaving the adapter" ..direclty going to mapping
do you have any error in the communication channel monitoring? - NO ERROS
Dear All,
While executing CK11N one material in BOM is not included in std cost.
Bom for material is:
Material 1(rm)=10 qty
Material 2(rm)=10 qty
Material 3(by product)=1- qty
Material 4(SFG)
While executing CK11N material 1,2 and 3 are visible but material 4 values are not updated.
I have checked that for material 4 price and qty are maintained properly in material master but still it is not picking up in CK11N.
What can be the reason behind this behavior of system????
Regards
Nitu
Hi Dwyane,
If you are a beginner, then i will suggest to to study developer guide of SAPUI5. SAPUI5 SDK - Demo Kit
After that you may find a lot of blogs and documents according to your need on SCN.
You may also refer this blog.
A Complete beginner's guide for SAPUI5
Here you can start with installation.
Step by Step Video tutorials for Installing SAPUI5 tools in Eclipse
You may also refer this youtube link. Basics of SAPUI5 - YouTube
Regards
Dhananjay
works like a charm.
thankyou
Explained for RG23A and C part-2 but I want to know about RG23A and C part-1.
My query was also for RG-1. I am uploading RG -1 balance in table J_2IRG1BAL but balance are not showing for all material codes.
Rgds,
Priyam Agrawal
Hi All,
Just wanted to know whether PI will apply any algorithm by default when sending message to SOAP system using SOAP adapter with HTTP Protocol?
I am integrating SFDC system and facing SSL issue while pushing data in to SFDC, SF consultant says they have not enabled SSL auth and neither i am using it in SOAP channel, wondering how am i getting SSL error in SOAP receiver channel.
Is there any option that i can check in SFDC system to confirm they have not enabled SSL auth?
Regards,
Mani
Dear All,
I already designed one form. it works fine. I add one Checkbox in the form using Screen Painter in SAP B1. The Checkbox displayed in the Form. But When i am trying to check , The tick was not shown in the Checkbox. Why? How to solve this?
Some details about the form:
1) The Table type is Document.
2) Bind the Data via Screen Painter.
Specify Table name for that Field.
Enter Alias -- Column Name.
Set Datasource is True.
Note: Already Data enter in the Table
Hi,
I'm trying to use the SQL Script CV in another Graphical CV but facing some errors on the SQL. I've used the SQL Script CV (Ranking calculation) as one of my projection view in the grap cv. I'm unable to do a simple data preview on the projection view. It returns me the below error when I select on Raw Data.
Error: SAP DBTech JDBC: [257]: sql syntax error: [257] sql syntax error: incorrect syntax near "AS": line 1 col 468 (at pos 468)Please check lines: 4,
This is the generated SQL and the input parameters are mapped from Grap Cv to the Script CV.
SELECT TOP 200 * FROM "_SYS_BIC"."PROJECT1/VOL_RANK/dp/Projection_vol" ('PLACEHOLDER' = ('$$IP_COMP_ID$$', '4000'), 'PLACEHOLDER' = ('$$IP_MONTH$$', '3'), 'PLACEHOLDER' = ('$$IP_YEAR$$', '2015'))
However, I've no problem viewing the result directly from the SQL Script CV.
My simply code for SQL Script CV as below.
BEGIN
var_out = SELECT "YEAR_INT", "MONTH_INT", "COMP_ID", "COMP_TXT","RANK", "VOL_SUM"
FROM (
SELECT "YEAR_INT", "MONTH_INT", "COMP_ID", "COMP_TXT",
dense_rank() over ( order by SUM("VOL") desc) AS "RANK",
SUM("VOL") AS "VOL_SUM"
FROM"_SYS_BIC"."PROJECT1/CA_VOL"
WHERE "YEAR_INT" = IP_YEAR AND "MONTH_INT" = IP_MONTH AND "COMP_ID" = IP_COMP_ID
GROUP BY "YEAR_INT", "MONTH_INT", "COMP_ID", "COMP_TXT",
ORDER BY "RANK")
WHERE RANK <= 5;
END
Hopefully someone could shed some lights if there's anything I missed out or whether this is a good approach.
Thanks in advance.
Hi
so, you can add the data element which has search help, so when you click on this field you can get the entries F4.
how can you get the values, so you can read the table field and you can get it .
look to this example, hopfully could help you .
REPORT ztest300.
DATA: BEGIN OF fields .
INCLUDE STRUCTURE sval.
DATA: END OF fields.
DATA lt_fields LIKE TABLE OF fields.
CLEAR fields.
MOVE 'T001L' TO fields-tabname.
MOVE 'WERKS' TO fields-fieldname.
APPEND fields TO lt_fields.
CLEAR fields.
MOVE 'T001L' TO fields-tabname.
MOVE 'LGORT' TO fields-fieldname.
APPEND fields TO lt_fields.
CALL FUNCTION 'POPUP_GET_VALUES_USER_HELP'
EXPORTING
popup_title = 'test'
TABLES
fields = lt_fields.
LOOP AT lt_fields INTO fields.
ENDLOOP.
BREAK-POINT.
But you have only one field. so you need to read it than to loop it. Just write this code instead of loop
READ TABLE:
datalv_var TYPE string.
read TABLE lt_fields into fields index 1.
lv_var = fields-value.
Regards
Ibrahim
Hi Srinvas...
Try This
select
oitm.itemcode,
oitm.itemname,
oitm.frgnname,
oitm.capdate,
nc.APC as 'Acquisition Cost',
Dep.dep+Spdep as 'Accum Dep',SALvl AS Salvage,dm.rtr RetirementValue,
nc.APC-(Dep.dep+Spdep)- dm.rtr AS 'Profit/Loss'
from oitm
inner join (select itemcode, sum(ordpacc) as ordpacc from itm8 group by Itemcode)APC on APC.itemcode=oitm.itemcode
inner join (select itemcode, SUM([OrdDprPost])as dep, SUM([SpDprPost]) as Spdep from odpv group by itemcode)DEP on DEP.itemcode=oitm.itemcode
INNER JOIN ( select itemcode, SUM (T0.apc) AS APC
FROM [dbo].[FIX1] T0 INNER JOIN [dbo].[OFIX] T1 ON T1.[AbsEntry] = T0.[AbsEntry] AND t0.TransType='110' GROUP BY itemcode ) AS nc ON nc.itemcode=oitm.itemcode
INNER JOIN ( select itemcode, SUM (a0.SalvageVal) AS SALvl , SUM(TransAmnt) AS a
FROM [dbo].[FIX1] a0 INNER JOIN [dbo].[OFIX] a1 ON a1.[AbsEntry] = a0.[AbsEntry] GROUP BY itemcode ) AS d ON d.itemcode=oitm.ItemCode
LEFT JOIN ( select itemcode, SUM (T0.TransAmnt) AS Rtr
FROM [dbo].[FIX1] T0 INNER JOIN [dbo].[OFIX] T1 ON T1.[AbsEntry] = T0.[AbsEntry] AND t0.TransType='210' GROUP BY itemcode ) AS dm ON dm.itemcode=oitm.itemcode
where oitm.itemtype='F'
Regards
Dear All,
I am getting the Following error " The Entry already exists in the Following Table". I am adding one column into existing table. It is an YesOrNo column(CheckBox Value). some information are stored in the Table. How to solve this issue?
Dear guyz,
I have configured all XCM settings for B2b shop. but when i try to login for the B2b shop, it is throwing an error
" Error while executing SAP E-Commerce Application with UME"
Please let me know the issue.
Regards,
Sunil
any update>?