Discussion is now locked. Please start a new Discussion as Bill requested.
Regards, Mike (Moderator)
Discussion is now locked. Please start a new Discussion as Bill requested.
Regards, Mike (Moderator)
Does this FOXHOUND work with Version 12.01 database?
We have the latest EBF and we are hoping that support is going to help us get to the to the bottom of it - so far, we've not had any luck. The information that was sent to us about the PLAN really didn't offer a solution ... and as I said, it runs in 3 seconds and the view table has 11 records in it....
Hi Gersh,
In my case my question is: I have a dimension with 300K members (Obligatory). I'm have a negative impact to performance. How can that be fixed?
Another question Is there any documentation or table with a relation Hardware-Maximum amount of transactional records that can be saved in a cube?
Thanks for your response,
Regards.
Eng Martín D. Novachig
After the vendor is done with the external service,you create a master warranty (vendor warranty) using transaction BGM1. Say it is warranty for xyz vendor. For all the different types of repairs for which vendor had done repair you create services say Hydraulic system repair, engine repair etc. Note that you need to create Hydraulic system repair and engine repair as service materials (DIEN) in transaction MM01.
Now you need to assign counters to each of the services.
Assign this master warranty created to the equipment master.
In IMG, you need to define Warranty type, number range for warranty type and warranty counter.
Path is IMG>Plant maintenance and customer service> Basic settings> Warranties> Define warranty types.
If there are different vendors which did repair for this equipment, you need to create a generic master warranty and identify the name of the vendor in the name of service material itself.
Also you need to tick 'Dialog box order' while configuring warranty type. This ensures that whenever somebody is creating a new work order wrt equipment which has assigned master warranty, in that case a pop up will come to tell whether warranty is active or not.
Hope this helps.
Thanks,
Tajinder
which country you are looking for? v_t588mfpropc does it show in table and after activating does it appear, if it doesnt then you need to above customisation or coding changes
Hi All,
We are moving from a single server solution, over to the Windows DFS (Distributed File System) where there are N number of servers in the cluster.
Could you please advise on the below questions. I am sorry for my naive questions.
1) Do we need to install the platform agent on all the nodes in the cluster?
2) or do all these servers have a shared physical drive where if we install should be suffice,so that we no need to install on all nodes in the cluster?
3) If we install the agent on 2 nodes, does it mean that we have used 2 licenses or it counts only as single license in this cluster environment?
Thank you in advance.
Regards,
Ramana
Hi ,
You can go to Dashboard management tool to see the list of existing dashboards.In Easy access menu check if there is an icon called "Dashboard Management tool" .Double click on it and on left hand side you will see the list of existing dashborads .There you have option to create a new dashboard
If it is not there is easy access menu you can access using below link
http:<hostname>8000/sap/bc/webdynpro/sap/dashboard_management?sap-language=EN
make sure /sap/bc/webdynpro/sap/dashboard_management service is active in SICF
Regards,
Murali
Hi,
I am configuring a new output type for inbound deliveries.
I created a new access sequence and assigned to output type.
Access sequence contains 3 condition tables assigned. Here , there is a option to assign requirement routine to condition table.
Then I assigned Output type in 'Output determination procedure '. I see option to enter requirment routine in this step as well.
Could you explain why there are 2 diiferent options to enter requirement routines i.e. one at access sequence level and other at output determination procedure level?
And also at access sequnece level , what are the scenarions where we need to assign different requirement routines to different condition tables in same access sequence?
Thanks
Terry
Hi,
That's what the user told me or he did not know what he did.
Could you please help in deleting this delivery.
I tried LT0G and the program - RVDELSTA.
But unable to delete.
Hi can I used the Backup to just back up the Dimension and restore the dimension in QA and DEV ? Or when we backup it's all the environment is take in charge ? With UJBR
whats the version of IE and backend SASPUI typically you can see there are many fixes released for this.
*& Object METH CL_HRESS_TEAM_CALENDAR_FC *& READ_BIRTHDAYS_ANIVERSARIES check the class above For more information, see Customizing for Personnel Management under Employee Self-Service (SAPUI5) Landing Page Employee Profile BAdI: Modification of Card Visibility .
Hi Cat,
Use transaction KS02 to delete cost center 123.
Then use transaction KS01 to create a new cost center 456.
Impact of changing one cost center to another by this way is that wherever you are using the old cost center will become invalid.
So, best approach for you is let 123 as it is and create a new cost center using KS01 as 456.
Master table for KOSTL(Cost Center) is CSKS.
Richa.
Hi Milena,
Have a look at this link to start. There are samples available.
http://scn.sap.com/thread/1006689
You can get more help from the SDK forum.
http://scn.sap.com/community/bi-platform/microsoft-net-sdk
Good luck,
Brian
I have found the answer.
Add this code to the component.xml:
<component
id="ConditionalTable"
title="Conditional Table"
icon="res/icon.png"
handlerType="div"
propertySheetPath="res/additional_properties_sheet/additional_properties_sheet.html" databound="true">
<jsInclude>res/js/component.js</jsInclude>
<cssInclude>res/css/component.css</cssInclude>
<property
id="resultset"
title="Resultset Filters"
type="ResultSet"
group="DataBinding">
</property>
Then in the oComponentProperties of the This object, the data can be found. It is contained in the resultset property. resultset is the id that I gave the ResultSet in the components.xml. Now, the data just needs to be decoded, so that it can be arranged properly in a table.
Hi,
The answer is no. MRP can only PREDICT. Unless you change system time, that is not the actual history though.
Thanks,
Gordon
Hi,
Our outbound BDOC queue (in the ERP system) stalled last night, and we found the following two entries in the system log (SM21):
20:47:06 DIA 006 400 SYS_USER Q2 X QEXCLUDE R3AD_CUSTOME,BDOC_CONNECTOR_400 201659,20150202
20:47:48 DIA 006 400 SYS_USER Q2 X DEXCLUDE BDOC_CONNECTOR_400 201659,20150202
This one is new to me! Does anybody know what these QEXCLUDE and DEXCLUDE messages mean?
When you drill down, it has this info:
Details
Recording at local and central time........................ 02.02.2015 20:47:06
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
02845 Dialog work process No. 006 SYS_USER 170.18.3 1 SAPMSSY1 T Transaction Problem SRFC
thanks
Paul
Hi Sai,
Message clearly says that it is trying to call a screen in background when you execute your program.
Please check and debug where it is calling a screen and at what condition. Is it from standard code or from some enhancement.
Richa.
Thanks Dirk for taking time and replying. This approach has already implemented and Only works if the custom range is static. In our scenario, the "custom Range" is a variable and may change for each table. For eg:
Thank you for your reply. I means one header BOM with one material but the material has three different one. That means the header finish part has three different BOMs. How can I define exact the finish part cost?