Dear Siva,
As seven said if you are a super user or power user or end user better don't touch SAP, because it may cause a big damage for system. If you are entry level consultant please educate your user and make a test scenario in Quality server or in Production server itself do simulation payroll run enable payroll log and share with us 
Good luck,
Naresh.
This is not SD related query but related to PP. Anyway, have a look at this thread whether it is helpful for you
How to get the rescheduling date in MD04?
Else, I will move this thread to PP forum.
G. Lakshmipathi
Hi, I can get IR-MM doc # from AWKEY field of IR-FI document. So, I will have IR MM doc# and Fiscal Year. I am hesitant to use the cluster tables, due to performance issue.
Hi, I can get IR-MM doc # from AWKEY field of IR-FI document. So, I will have IR MM doc# and Fiscal Year. I am hesitant to use the cluster tables, due to performance issue.
If you are currently developing your ABAP skills, then why don't you write some code and try to do this, rather than post here and expect it to be coded for you?
Google "abap insert" command, also "upload csv file" etc. Do some research first.
Also, please don't post the same question twice. Close one of these.
Dear all,
The following SAP Notes were delivered from Support Package 73 (SAP_HRCUS 604) and Support Package A7 (SAP_HRCUS 600) on. All of them deliver corrections to report HRPAYUS_SYNC_TAX_DT.
2046535 BSI: Sync Payroll Tax Data displays error message when running in productive mo
Release date: 28.07.2014
Support Package (604): SAPK-60478INSAPHRCUS
Support Package (600): SAPK-600B2INSAPHRCUS
2009438 BSI: Sync.Payroll Tax Data shows error message - New authority was not inserted
Release date: 25.04.2014
Support Package (604): SAPK-60474INSAPHRCUS
Support Package (600): SAPK-600A8INSAPHRCUS
2043697 BSI: Sync. Payroll Tax Data generates a short dump when running in productive m
Release date: 24.07.2014
Support Package (604): SAPK-60477INSAPHRCUS
Support Package (600): SAPK-600B1INSAPHRCUS
1984911 BSI: Synchronize Payroll Tax Data - General Corrections
Release date: 03.07.2014
Support Package (604): SAPK-60473INEAHRCUS
Support Package (600): SAPK-600A7INSAPHRCUS
1992315 BSI: Required TUB level for Synchronize Payroll Tax Data tool
Release date: 02.06.2014
Support Package (604): SAPK-60473INSAPHRCUS
Support Package (600): SAPK-600A7INSAPHRCUS
1992697 BSI: Sync. Payroll Tax Data is generating duplicated tax authorities
Release date: 02.06.2014
Support Package (604): SAPK-60473INSAPHRCUS
Support Package (600): SAPK-600A7INSAPHRCUS
If you are facing issues with inconsisten entries on the tables changes by this program, or errors when executing it, these could be caused by the issues addressed by these SAP Notes.
You should also bear in mind that report RPUPAYUS_SYNC_TAX_DATA should be used only after TUB 019 has already been implemented in your system, as informed in SAP Note 1992315.
Regards,
Cassiana.
Dear Pavlo,
Job profiles here require minimum of 2 years of experience in most of the fields, I'm tired of trying to get in as a fresher in Companies that run SAP. That's the whole reason why I'm planning to return back to India for my training in SAP, when I come back I'll have atleast 1 year experience plus basic knowledge on SAP. And by consultant I meant Job Consultant who is also helpless, without experience there is nothing much he can do to boost my profile to his clients.
My silver lining was the associate consultant training for freshers... if there are good training centers that give us thorough training on the basic's, and a glimpse/overview of how a SAP project starts and ends, that would have been a great place for me start.
Please correct me if my ideas or my thought process I'm wrong.
and regarding work permit in USA, with your experience and knowledge.. I'm sure if you try, you'll easily get it without any trouble! Give it a try
It stopped in the methods get_instance and get_f4_reasons but still the email is not sent to the employee.
Is there something specific I need to check in the Transaction so16?
Also, it's the Function Module CATS_SEND_MAIL which is used to send the emails on Rejection,right?
Thanks
Hi All
While I am loading the master data for account dimension I need to setup the Ratetype property value as per the below condition.
I am loading the GL number ranges between 100000 to 499999 and I setup the Ratetype mapping as below:
RATETYPE = *IF(ID(1:5)=*STR(00001) then *STR(EOM);ID(1:5)=*STR(00002) then *STR(EOM);*STR(AVG)) and it works fine.
Now the requirement is as below:
Now there is few gl accounts between this number ranges those are identified randomly (near about 100 gl's) for setup the Ratetype value as HIST.
Please suggest how can i achieve this?
Regards
Srikant
Hello
Have you read this KBA ?
1624942 - DDIC_ACTIVATION stops with error message "Field in table is specified twice"
Regards
RB
Hello everyone.
The transactionsXD02orFD02doesn't display inthe screen the fields: Tax Number Type and Tax Type . AlthoughXD01andFD01 if display on screenthese two fields.I was reviewingthe customizing and I don't found an option for this.
How to changethe fields Tax Number Type and Tax Type forcustomers?.
I was readingand Ifound that can usetheBAPI: BAPI_CUSTOMER_CHANGEFROMDATA1.
I do not knowhowto use thisBAPI(from whereto call it). Someonehas anidea?.Orthere will beanotherway that allowsupdate thesetwo fields inthe customer masterdata?
I appreciate any help.Thanks
Hi Eric,
This is my first time out with CR10. I am converting CR4.5 reports written for VB6. Some years ago I tried CR8 that came with VS2005.Net, but it didn't have the ability to give it an SQL statement, and who wants a million rows returned to the report viewer if you only want one or two?
I use a dataset that was loaded based on my sql where clauses and load it to the report document. In other words, the report is built around a SQL statement that returns all records, but I build a dataset based on parameter entry, and pass it to the report. There are two problems I have noticed; if no records are returned, ReportViewer is unhappy, displaying an error message about groupings; and if the user clicks on the Group Tree panel to navigate to a specific group, the report display is refreshed from the internal query, displaying ALL rows! I haven't figured out how to deal with that yet. I'm hoping to learn that there is an event I can trap to reload from my query, rather than the full query...If I hide the group panel, the user can still open it, unfortunately. I also use multiple .RPT files with one viewer.
privatevoid loadReport(int reportId)
{
ReportDocument rptDoc = newReportDocument();
DataTable dt = newDataTable();
dt.TableName = "Company Report";
dt = getReportRecords(reportId).Tables[0];
string fileName = GetReportFileName(reportId);
rptDoc.Load(fileName);
rptDoc.SetDataSource(dt);
CrystalReportViewer1.ToolPanelView = ToolPanelViewType.None;
CrystalReportViewer1.ReportSource = rptDoc;
}
Mark
Hi Tejas
Yes i got that...but if the detail node is repeating as per screenshot above then how can we collate all the detail nodes of a particular emplyee i.e. 1234 in one single person node??
Twomore detail nodes having bbb & xxx value ofcountry shd get created and ggg should be passed to detail node of 4321.
Thanks
Hi,
Thanks for feedback. It is not possible to get drill down arrow in this query.
Thanks & Regards,
Nagarajan
I work in an appliance store and i am assigned in accounts recievables as well as sales...whenever i do invoices for account balance matching in the ledger cards,i make invoice and use Accounts Receivable (non-trade)but im not so sure about it if its really the GL account to be used...
Entendi Andre...
Aqui pelo jeito vamos ficar no 600 por um tempinho ainda.
Quando subirem para uma versão mais atualizada iremos pensar a respeito dessa mudança de BADI.
Muito obrigado!
Luis.
Thx for the response but users also want to know if message has been send correction from SAP system and not just events reporting.Can we use AIF to have this functionality feasible.
Hello,
>>Currently, I am using standard update/insert command but it is giving deadlock error in PI.
Check my reply in below thread to insert huge data in a xml string format to DB
jdbc receiver channel insert slow
Thanks
Amit Srivastava
Hi Hana Live Experts,
Please let me know where can I find HANA Live Content views column mapping to ECC tables document?
Thanks
Srinivas
are you sure about this? AFAIK the EOIO will not be affected no matter if the queue name was changed
